COMPONENTS

Diffusers

CS400(Square Diffuser) and CC400(Circular Diffuser) are perforated diffuser for supply and exhaust air. Its simple line makes it a pleasant solution for modern ceiling design. Its reduced vertical size provides high levels of comfort even for rooms of 2,2 m height.

The induction of the ambient air caused by the plate, the tangential diffusion taking advantage of the coanda effect guarantee low temperature gradient indoors, low residual velocity, no formation of stale air in the occupied area.

Brochure

Air Terminal Units

TSC air distribution terminals have been appositely designed for ceiling installation on board of ships and permit, by means of manual control, the regulation of the air quantity in the ambient.

TSCR air distribution terminal with electric re-heating have been appositely designed for ceiling installation on board of ships and permit, by means of a room thermostat, the individual regulation of the temperature inside the rooms and, by means of a manual control, the regulation of the air flow.

Brochure

Supply and Exhaust Valves

The LK exhaust air valves are manufactured in steel plate with white epoxi paint (RAL 9010) high resistant to corrosion. The units are manufactured by frame and disc or seal. The frame joint and the fitting collar assure a perfect watertightness.

The finish of the KE suply air valves is ideal for any type of rooms. The disc form assure an optimal air diffusion with a low noise level even with important air flows. The use of the KE supply air valve is specially indicated to install in staterooms, offices, hotels, hospitals, etc.

Brochure

Nozzles

Air projection nozzles with airflow between 40 and 170 m3/h each supply unit. Associated to a heating coil and ventilation system, they form a complete defrosting system. They are used for cooling spot system, too.

Brochure

Grilles

The RMT-A square series grilles are designed to be used in air-conditioning, ventilation and heating. They form a square netting, designed to be used in extraction. They are mounted on walls or in false ceilings.

The CTM double deflection series grilles are designed to be used in air-conditioning, ventilation and heating. They are mounted on walls or in false ceilings. The direction of the blades can be altered, making it possible to graduate the extent, the height and the width of the air stream.

Brochure

Goose Neck

Heavy-duty Goose necks for marine application. Specially designed for protection of incoming seawater spray and rain.

Our long-experience and know-how have contributed to a simple and functional construction.

Brochure

Ventilation Louvers

Sturdy Ventilation Louvers designed for Marine applications.

Brochure

Mist Eliminator

One of the main problems which on-board ventilation and air-conditioning systems suffer from is deterioration through corrosion. The consequences affect both the ducts system and the electrical and air treatment equipment, and, in general, the useful life of the facility. Most of these problems are the result of an ineficient air input system, which does not properly eliminate the corrosive elements of the marine environment.

The Mist Eliminator filters minimise these problems, removing the salt water from the marine environment and not allowing it to enter the ducts system, thus prolonging the useful life of the facility (equipment and ducts) and extending the time between cleaning and maintenance operations.

Brochure

Ducts

Actually, the interior air conditioning requirements are very strong, which implies a costly treatment of the air. It’s very important that the duct system be hermetic to maintain the operating costs and the global economy in reasonable level. The air leakage increase the operating costs and they cause problems in regulation and pipelines overdimensioned.

The presented system consists in spiral ducts and pieces provided with rubber seals with double profile manufactured in long duration EPDM rubber. The double seal guarantees an air thigth union for pressure test with no influence in temperature variations.

Brochure

Dampers

Manual regulating damper has a turning, cut-off blade to balance the airflow. The damper cup has marks showing the position of the damper blade between 0 and 90ºC. The damper blade can also be locked in position with screws. Available insulated model (mineral wool thickness 50 mm and outer sheath) and no insulated model.

Brochure

Fire Dampers

Damper housing made out of strong bath-galvanized steel sheet, according to UNI 5744, sheet thickness 30/10.

Brochure

Shut-Off Dampers

Shut-off dampers are used to stop the air flow within ductworks or behind air intake grilles for ships and offshore installations.

Brochure